CQ5010C/CQ5010D
SINGLE CHANNEL OSCILLOSCOPE
Features
.10MHz single channel
.Electrical encoder switch to make high stability
.TV synchronizing, X-Y operating
.Easy to operate
.High performance, sensitive 5mV/DIV
.New novel appearence
| Technical Data | CQ5010C/CQ5010D |
| CRT |
| Type | 3" round |
| Display area | 8 x 10DIV (1DIV=6mm) |
| Lightering color | Green |
| Potential | 1.3kV |
| VERTICAL SYSTEM |
| Sensitivity | 5mV / DIV~5V / DIV ±3% |
| Width of band (-3dB) | DC: 0~10MHz |
| AC: 10Hz~10MHz |
| Max. Input Voltage | 400V (DC + ACpeak) |
| Input Coupling | AC, DC , GND |
| Input Impedance | 1MΩ±3% 30pF±5pF |
| Trimming ratio | 2.5 : 1 |
| HORIZONTAL SYSTEM |
Sweep time
| 0.1S / DIV ~ 0.1μS / DIV ±3% |
| Trimming ratio | 2.5:1 |
| TRIGGER SYSTEM |
| Mode | AUTO, NORM, TV |
| Source | INT, LINE, EXT |
| Polarity | "+" or "-" |
| Trigger sensitivity | INT: 1DIV, EXT: 0.3V, TV: 2 DIV |
| External trigger input | Input impedance: 1MΩ±3% 25pF±5pF |
| Max. input voltage: 160V (DC+ACpeak) |
| X-Y OPERATION |
| Sensitivity | X: 0.5V / DIV |
| Y: 5mV / DIV ~ 5V / DIV |
| Width of band (-3dB) | DC: 0-1MHz AC: 10Hz - 1MHz |
| Phase difference | ≤3° (DC ~ 50kHz) |
| CALIBRATION |
| Source | 1kHz±2% 0.5Vp-p±2% square wave |
| POWER SOURCE | 110~127 VAC±10%, 220~240VAC±10% 50Hz±2Hz, 60Hz±2Hz |
| ACCESSORIES | Instruction manual x 1, Power cable x 1 ,Fuse x1 ,Probe x1 |
| DIMENSIONS & WEIGHT | 225(W) x 91(H) x 290(D)mm ,140(W)x196(H)x290(D) Approx 3kg |
