XPF seires
DDS FUNCTION (ARBITRARY) GENERATOR
Features
.Respective dual channels function/arbitrary waveform generator
.Sine wave output up to 160MHz, full-band resolution of 1μHz
.Pulse waveform up to 50MHz (or 40MHz), adjustable time of rising, falling and duty ratio
.Sampling rate of 500MSa/s and vertical resolution of 16bit
.6-bit high-precision frequency meter compatible with TTL level signal
.Arbitrary wave storage of 8～32M points, 7GB non-volatile waveform storage
.Multi modulation function:：AM,FM,PM, ASK,FSK,PSK, BPSK, QPSK,OSK,PWM, QAM, SUM
.16bit digital arbitrary wave (TTL level) DARB
.16th Harmonic Generation Function
.Protocol output: I2C, SPI, UART (TTL level)
.8 Inch high-resolution TFT color LCD,WVGA(800×480)
.Standard interface: USB Host, USB Device, LAN, 10MHz clock source input/output
.Frequency sweep and burst output
.Easy-to-use multi-functional knob and numeric keypad
| Technical Data | XPF4080 | XPF4120 | XPF4160 | | CH1,CH2 | Output frequency | Sine: 1μHz~80MHz
Square: 1μHz~30MHz
Ramp:1μHz~2MHz
Pulse: 1μHz~30MHz
Arbitrary:1μHz~20MHz
Harmonic: 1μHz~40MHz
White noise: 80MHz BW (-3db) | Sine: 1μHz~120MHz
Square: 1μHz~40MHz
Ramp:1μHz~3MHz
Pulse: 1μHz~40MHz
Arbitrary:1μHz~30MHz
Harmonic: 1μHz~60MHz
White noise: 120MHz BW (-3db) | Sine: 1μHz~160MHz
Square: 1μHz~50MHz
Ramp:1μHz~4MHz
Pulse: 1μHz~50MHz
Arbitrary:1μHz~40MHz
Harmonic: 1μHz~80MHz
White noise: 160MHz BW (-3db) | | Output amplitude | 1mVp - p~10Vp-p (50Ω load) (f ≤ 20MHz)
1mVp-p ~ 5Vp-p (50Ω load) (f ≤ 80MHz)
1mVp-p ~ 2.5Vp-p (50Ωload) (f≤120MHz)
1mVp-p ~ 1Vp-p (50Ωload) (f≤160MHz)
1mVp - p~20Vp-p (1MΩ load) ((f ≤ 20MHz)
1mVp-p ~ 10Vp-p (1MΩload) (f ≤ 80MHz)
1mVp-p ~ 5Vp-p (1MΩ load) (f≤120MHz)
1mVp-p ~ 2Vp-p (1MΩ load) (f≤160MHz) | | Output wave | Sine, Square, Ramp, Harmonic, Pulse, Noise, DC, Arbitrary, 7 types
of standard waveform, not less than 160 types of built-in arbitrary waveform | | Output modulation | AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, OSK, PWM, SUM, QAM | | Frequency resolution | 1μHz | | Frequency stability | ±50ppm(90days), ±100ppm(1 year) | | Amplitude resolution | 1μVp-p | | Amplitude accuracy | ≤1%+1mVp-p | | Amplitude flatness | f≤10MHz：±0.1dB, f≤80MHz：±0.2dB, f≤120MHz：±0.4dB, f≤160MHz：±0.8dB | | Offset range | ±10V (1MΩ load)/±5V (50Ω load) | | Offset accuracy | ±(2% of |offset setting|+ 0.5% of amplitude+2mV) | | AM modulation depth | 0% ~ 120% | FM modulation
deviation | Max.50%, 10μHz resolution | | PM modulation range | 0~ 360.0°, 0.1°resolution | FSK/ASK/PSK
BPSK/QPSK | 2mHz~1mHz (50% duty cycle square) | | PWM | 2mHz~50kHz | | OSK | Oscillation time: 8ns～200s, keying frequency: 2mHz～1MHz | | SUM | 0~100% | | Sine wave | Harmonic distortion | -60dBC (DC~1MHz), -55dBC (1MHz ~10MHz)
-50dBC (10MHz ~100MHz),-40dBC (100MHz ~160MHz) | | Distortion factor | ≤0.2 % (DC~20kHz,1 Vp-p) | | Square wave | Rise time | < 7ns | < 6ns | < 5ns | | SYMM. | 1% of period + 4ns | | Overshoot | < 2% | | Jitter | 1ns + 100ppm of period | | Triangle wave | Linearity | <1% of peak output（typical，1 kHz，1 Vp-p，Symmetry 100%） | | Symmetry | 0~100% | | Sweep | Sweep time | 1ms ~ 500s±0.1% | | Sweep mode | line/log | | Burst | Type | Count(1~50,000 periods), infinite, gated | | Initial and stop phas | -360°~ +360° | | Internal cycle | 1μs ~ 500s ±1% | | Gate source | External trigger | | Trigger source | Manual, external or internal
| | Pulse |
| XPF4080 | XPF4120 | XPF4160 | | Frequency range | 1μHz ~ 30MHz | 1μHz ~ 40MHz
| 1μHz ~ 50MHz | | Pulse width | 10ns~2000s, 1ns resolution | | Variable edge | 7ns~10s | 6ns~10s | 5ns~10s | | Over shoot | <5% | | Jitter | 1ns + 100ppm of period | | Arbitrary | Waveform length | 8~32M points | | Amplitude resolution | 16 bits | | Sample rate | 500 MSa/s | | Rising/falling time (1Vp-p) | <7ns | | Jitter (RMS) | 6ns+30ppm | | Non-volatile memory | 7 GB | | Harmonic | Harmonic number | ≤16 | | Harmonic type | Even harmonic, odd harmonic, all harmonics, user-defined | | Counter | Frequency range | 100mHz~800MHz | | Frequency resolution | 7 digits/s | | Input level | TTL compatible (200mVpp ~ 9Vpp) | | Trigger level | 0~2.5VDC | | Accuracy | ±51ppm | | SPI protocol output | Waveform length | 1~512 bytes | | Clock frequency | 10kHz~40MHz | | Sending mode | Single manual trigger, continuous trigger | Continuous trigger
time interval | 0~2.5VDC | | I2C protocol output | SPI Waveform length | 1~512 bytes | | Clock frequency | 10kHz~1MHz | | Sending mode | Single manual trigger, continuous trigger | Continuous trigger
time interval | 1ms~10s | | Address | Send 7-bit/10-bit I2C address | | UART protocol output | SPI Waveform length | 1~1K bytes | | Baud rate | 110, 300, 1200, 2400, 4800, 9600, 19200, 38400, 56700, 115200, 230400, 460800, 921600, user-defined | | Data bit | 4 bits, 5 bits, 6 bits, 7 bits, 8 bits | | Sending mode | Single manual trigger, continuous trigger | Continuous trigger
time interval | 1ms~10s | | Stop bit | 1 bit, 2 bits | | Check bit | No check bit, odd, even | | DARB | Waveform length | 1~1K bytes | | Sampling rate | 1S/s ~ 40MS/s | | Sending mode | Single manual trigger, continuous trigger (no time interval) | | Waveform resolution | Maximum 16 bits | | QAM | QAM mode | QAM4, QAM8, QAM16, QAM32, QAM64, QAM12, QAM256 (built-in constellation modulation) | | Modulation source | Built-in PN code, Pn7, Pn9, Pn11, Pn15, Pn17, Pn21, Pn23, PN25 | | Chip rate | 2mHz~100kHz | | Amplitude | 10mVpp~10Vpp (50Ω) | | Interface | USB Host(maximum 32G), USB Device, LAN, 10MHz clock source input,
10MHz clock source output | | Power supply | 100~240VACrms, 50/60Hz, CAT II 300V | | Dimension(W×H×D) | 336 × 164 × 108mm | | Weight | 2.5kg |
|
