|
|
TEST INSTRUMENT CATEGORY
|
|
|
|
|
| |
|
DQ2000 Series
DIGITAL STORAGE OSCILLOSCOPE
Features
. 250MSa/s~1GSa/s sampling rate
. 2 X 512K words per channel record length
. FFT function
. Auto-setting for quick setup and waveform acquisition
. 5.7-inch color/black-white LCD display, multicolor interface available
. Advanced cursor modes:manual, auto and track
. USB-HOST/DEVICE, RS232 interface (not for DQ2025BN) |
DQ2102CN
|
| |
| TechnicalData |
DQ2025BN/2042BN(E)/2062BN(E)
DQ2102BN(E)/2152BN(E)/2202BN(E) |
DQ2025CN/2042CN(E)/2062CN(E)
DQ2102CN(E)/2152CN(E)/2202CN(E)
|
| Display |
| Type |
5.7" rectangle mono LCD |
5.7" rectangle color LCD |
| Backlight intensity |
60cd/m2 |
| Display resolution |
320 horizontal×240 vertical pixels |
| Display contrast |
Adjustable |
| VERTICAL SYSTEM |
| Sensitivity and accuracy |
2mV / DIV~5V / DIV |
| Vertical resolution |
8 bit |
| Width of band (-3dB) |
DC(AC 10Hz) ~25MHz (DQ2025) ;DC(AC 10Hz) ~ 40MHz (DQ2040) |
| DC(AC 10Hz) ~60MHz (DQ2060) ;DC(AC 10Hz) ~100MHz (DQ2100) |
| DC(AC 10Hz) ~150MHz (DQ2150) ;DC(AC 10Hz) ~200MHz (DQ2200) |
| Rise time |
≤14ns (DQ2025) ≤8.8ns(DQ2040) ≤5.8ns(DQ2060) |
| ≤3.5ns(DQ2100) ≤2.3ns(DQ2150) ≤1.8ns(DQ2200) |
| Sing-shot band width |
25MHz |
| Input coupling |
DC , GND , AC |
| DC gain accuracy |
±4% (2mV/DIV) ±3% (5mV/DIV~5V/DIV) |
Delta voltage Measurement accuracy |
±(3%Rdg+0.05DIV) |
| HORIZONTAL SYSTEM |
SEC/DIV range
|
5ns~5s/DIV |
| Sampling rate range |
N series: 500MSa/s E series: 1GSa/s DQ2025BN/CN:250MSa/s |
| Wave forn interplation |
(Sinx)/x |
| Record length |
2 x 512k/channel |
| Sampling rate and delay Time accuracy |
±100ppm over any ≥1mS time interval |
| Delta time Measurement accuracy |
±(1 sampling interval time+ 100ppm x rdg +0.6nS) |
| TRIGGER SYSTEM |
Acquisition Mode |
AUTO, Normal, Single |
| Type |
Edge,TV, pulse, Width |
| Hold Off Range |
100ns~1.5s |
| MATH |
＋，－， ×， ÷ |
| FFT |
| ACQUIRE INPUT |
| Input couping |
DC、AC or GND |
| Input impedance |
1MΩ±2% 24pF±3pF |
| Probe attenuation |
1x、10x、100x、1000x |
| Max.input voltage |
400V (DC+AC peak) at 1KHz or less |
| Channel CMR |
Better than 40:1 |
| Channel isolation |
Better than 40:1 |
| DISPLAY |
| Persist time |
1s, 2s, 5s |
| STORAGE |
Waveform, Setup. Bit |
| RECORDER |
Record, Replay |
| MEASUREMENT |
| Cursor |
Voltage difference△(V) between cursors |
| Time difference(△T) between cursors |
| Reciprocal of △T in Hz (1/△T） |
| AUTO-Mesure |
Vrms， Vavg，Vp-p,Vmax, Vmin, Vtop, Vhigh, Vlow, Vmid, Vamp;
period, Freq, Rise, Fall, +Width, +Duty, -Duty, Delay |
| I/O |
| Standard |
USB(D); USB(H); RS-232C (not for DQ2025BN) |
| Options |
LAN |
| CALIBRATOR SIGNAL |
| Output Voltage |
3V (≥1MΩ load) |
| Output Frequency |
1 kHz |
| POWER SOURCE |
100/240VACrms, 45Hz~440Hz, 50VaMax; CAT II |
| ACCESSORIES |
One operation manual,Power cord, USB cable, probe2, Software CD-ROM |
| DIMENSIONS & WEIGHT |
320(W) x 150(H) x 130(D)mm,
Approx. 2.5kg |
|
|
|
|
Copyright © Shanghai MCP Corp, 2011. All Rights Reserved
|
|
Add: Fl.3(East),Blk.4, Bai Da Industrial Park,No.1030 Tong Pu Rd., Shanghai, China
Tel: 86-21-52695961
Fax:86-21-52699261|Zip: 200333|E-mail: sales@mcpsh.com
|
|
|
|
