|
|
|
TEST INSTRUMENT CATEGORY
|
|
|
|
|
| |
|
DQ1000C SEIRES
LOGIC ANALYZER, OSCILLOSCOPE & MULTIMETER
Features
.Support logic analyzer and multimeter
.2GSa/s sampling rate and 50GSa/s equivalent sampling rate
.12k channel memory depth
.5.7-inch color LCD display
.USB-host/device, RS232 and option LAN GPIB interface |
DQ1202C
|
| |
| Technical Data |
DQ1042C |
DQ1062C |
DQ1102C |
DQ1152C |
DQ1202C |
| Channels |
2 external + logical analyzer + multimeter |
| Sampling rate |
2GSa/s |
| Equivalent sampling rate |
50GSa/s |
| Display |
| Type |
5.7" rectangle color LCD |
| Backlight intensity |
300 ni |
| Display resolution |
320 horizontal x 240 vertical pixels |
Vertical system
|
| Sensitivity and accuracy |
1mV/div~10V/div |
| Vertical resolution |
8 bit |
| Width of band (-3dB) |
DC (AC 5Hz)
~ 40MHz |
DC (AC 5Hz)
~ 60MHz |
DC (AC 5Hz)
~ 100MHz |
DC (AC 5Hz)
~ 150MHz |
DC (AC 5Hz)
~ 200MHz |
Selectable analog
bandwidth limit |
20MHz |
| Rise time |
≤8.7ns |
≤5.8ns |
≤3.5ns |
≤2.3ns |
≤1.8ns |
| DC gain Accuracy |
±5%(1mV/div) |
±4%(2mV/div) |
±3%(5mV/div~10V/div) |
| DC measurement accuracy |
±(5%+0.1div)(1mV/div) |
±(5%+0.1div)(1mV/div) |
±(5%+0.1div)(1mV/div) |
Horizontal system |
| SEC/DIV range |
2ns~50s/div(200MHz, 150MHz) |
| 5ns~50ns/div(100MHz~40MHz), at 1-2-5 increment |
| Waveform interpolation |
Sin(x)/x |
| Recording length |
1024k |
Sampling rate and delay
time accuracy |
±50ppm (any time interval 1ms) |
Delta time
measurement accuracy |
Single: ±(1 sampling time interval + 50ppm rdg. + 0.6ns)>16 |
| Average values: ±(1 sampling time interval + 50ppm rdg. + 0.4ns) |
Trigger system |
Mode
|
Auto, normal, single |
| Type |
Edge, pulse, video, alternate |
| Hold off range |
100ns~1.5s |
Math
|
+, -, x, ÷ |
| FFT |
Acquire input |
| Input coupling |
DC, GND, AC |
| Input impedance |
1MΩ±1.5% 24pF±3pF |
| Probe attenuation |
1x, 10x, 100x, 1000x |
| Max. input voltage |
400V (DC+AC peak) |
| Measurement |
| Cursor |
Voltage difference ( V) between cursors
Time difference ( T) between cursors
Reciprocal of T in Hz (1/ T) |
| Auto-measure |
Vrms, Vavg, Vp-p, Vmax, Vmin, Vtop, Vhigh, Vlow, Vmid, Vamp;
Period, Freq, Rise, Fall, +Width, -Width, +Duty, -Duty, Delay |
| I/O |
| Standard |
USB(D), USB(H) |
| Options |
GPIB, LAN |
| Calibrator |
| Output voltage |
3V≥( 1MΩ load) |
| Output frequency |
1kHz |
| Logical analyzer |
| Input channel |
200MSa/s |
| Max. sampling rate |
D0~D15 |
| Recording length |
512k |
| Max. input voltage |
±40Vpeak |
| Minimum voltage slew |
1.2Vpp |
| Trigger mode |
Code |
D0~D15
Trigger code: H, L, X
Clock edge: Rise, Fall |
| Persist |
D0~D15
Trigger code: H, L, X
Condition: >, <, =
Persist setup: 20ns~10s |
|
|
Digital multimeter characterizes
|
| DC voltage |
Range |
400.0mV/4.000V/40.00V/400.0V |
| Accuracy |
±(1%+5digits) |
| AC voltage (40Hz~400Hz) |
Range |
400.0mV/4.000V/40.00V/400.0V |
| Accuracy |
±(1.2%+5digits) |
| Resistance |
Range |
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
| Accuracy |
±(1.5%+5digits) |
| On/off |
<70.0Ω |
| Diode |
Forward voltage drop 0.5~0.8V |
| DC current |
Range |
4mA/40mA/400mA |
| Accuracy |
±(1%+5digits) |
| Range |
4A |
| Accuracy |
±(1.5%+5digits) |
| Power source |
100~240VACrms, 45~440Hz; 50VA Max; CAT II |
| Dimensions (Wx Hx D) |
320mmx150mmx130mm |
| Weight |
2.5kg |
| Accessories |
Operation manual, adapter, probex 2, multimeter penx2, current-voltage convertor modulex 2 |
|
|
|
|
Copyright © Shanghai MCP Corp, 2009. All Rights Reserved |
|
Add: Fl.3(East),Blk.4, Bai Da Industrial Park,No.1030 Tong Pu Rd., Shanghai, China
Tel: 86-21-52695961
Fax:86-21-52699261|Zip: 200333|E-mail: sales@mcpsh.com
|
|
|
|
