| 1 |
DQ1022 |
DQ1062 |
| Bandwidth |
25MHz |
60MHz |
| Channels |
2+ external + logical analyzer |
| Acquisition |
Mode: Normal, Peak detect, Average |
| Sample rate(real time) |
100MS/S |
250MS/s |
| Input |
| Coupling |
DC, AC |
| Impedance |
1MΩ±2% in parallel with 20pF±3pF |
| Probe attenuation factors |
1x, 10x, 100x, 1000x |
| Max. input voltage |
300V(DC-AC Peak, 1MΩ input impedance, 10:1 probe attenuation) |
HORIZONTAL SYSTEM
|
| Sampling range |
10S/s~100MS/s |
10S/s~250MS/s |
| Record length |
Max. 5K points |
| Time base range(S/div) |
5ns/div~5s/div(step as 1~2.5~5) |
5ns/div~5s/div(step as 1~2~5) |
| Time base accuracy |
100ppm |
VERTICAL SYSTEM |
| Vertical resolution(A/D) |
8 bits |
| Vertical sensitivity |
5mV/div~5V/div(input to BNC) |
| Position range |
±10 div(5mV/div~5V/div) |
±50V(500mV~5V)
±2V(5mV~200mV) |
| Simulate bandwidth |
25MHz |
60MHz |
| Single bandwidth |
Full bandwidth |
| LF respond(AC, -3dB) |
≤5Hz (to BNC) |
| Rising time(typical on BNC) |
≤14ns |
≤5.8ns |
| DC gain accuracy |
±5% |
TRIGGER |
Trigger Modes & sensitivity
|
edge: up, down
video: line in-phase, field in-phase
DC coupling: CH1 and CH2 1 div(DC~full bandwidth)
EXT: DQ1022:100mV(DC~25MHz), DQ1062:100mV(DC~20MHz)
EXT/5:DQ1022:500mV(DC~25MHz), DQ1062:500mV(DC~20MHz)
AC coupling: 1 div (50Hz~full bandwidth)
|
| Trigger level range |
internal: ±6 divisions from center screen
EXT: ±600mV EXT/5:±3V |
Trigger level accuracy
(typical) |
internal:±0.3 divisions
EXT:±(40mV+6% setting value)
EXT/5: ±(200mV+6% setting value) |
| Trigger displacement |
Front trigger 655 divisions, back trigger 4 divisions |
| Setting level to 50%(typical) |
When input signal frequency≥50Hz |
Trigger sensitivity
(video trigger, typical |
Internal: 2 divisions between peaks
EXT: 400mV EXT/5:2V |
| Line/field frequency(video) |
Support NTSC, PAL and SECAM |
PROBE COMPENSATION OUTPUT
|
| Output voltage(typical) |
Approx 5Vp-p, ≥1MΩ loading |
| Frequency(typical) |
1KHz square wave |
MEASUREMENT SYSTEM |
| Cursors measurement |
ΔV, ΔT |
| Automatic measurement |
PK-PK, averaging, RMS, frequency, period |
| Waveform math |
+,-, INVERTED |
| Waveform storage |
4 waveforms, 4 settings |
| Lissajiou's figure |
Available |
| LOGICAL ANALYZER |
| Max sampling rate |
100MHz |
| Input channel |
32/16 optional |
| Max storage |
4M/channel |
| Measurement bandwidth |
33MHz |
| Input impedance |
1MΩ±2% |
| Voltage |
0~4V |
| Input signal range |
0~5V |
| Trigger position setting |
Pre-trigger, mid-trigger, re-trigger |
| Trigger mode |
But trigger, state trigger, data alignment trigger, data width trigger |
| Data waveforms call-back |
Support |
| Data search |
Support |
| Data system |
Binary system, decimal system, hex |
| POWER SOURCE |
AC 110/220V±10%, 50Hz/ 60Hz, ≈35W |
|
|
ACCESSORIES
|
|
Instruction manual x 1,
Power cord x 1, fuse x1 ,USB x1
Probe x 2, Driver CD x 1 |
| DIMENSIONS & WEIGHT |
350(W) x 157(H) x 120(D)mm,
Approx.1kg |
