|
| www.mcpsh.com |
ISO9001:2000 |
|
 |
Fax Us: 86-21-52768908 |
|
|
|
|
|
TEST INSTRUMENTS |
|
|
|
|
|
|
|
|
| |
|
|
CQ6103 
100MHz DUAL CHANNEL OSCILLOSCOPE
Features
.100MHz bandwidth, dual channel, delayed sweep
.10 sets memory for front panel setting save & recall
.Cursor readout with 7 measurements
.Panel setup lock of digital-control functions
.Buzzer alarm
.Trigger singal output
.Z-Axis modulation input
.SMD technonlogy, high stability and reliability
|
CQ6103
Large view |
| |
| CQ6103 |
CRT |
| Type |
6" rectangle, internalgraticule, 0%, 10%, 90% and 100% marks |
| Display area |
8 x10DIV (DIV=10mm) |
| Accelerating potential |
16kV approx |
| Illumination |
Continuously adjustable at front panel |
| Z-axis input |
Coupling: DC |
| Sensitivity: 5V or more |
| Maximum input voltage:30V(DC+AC peak) at 1kHz
or less |
| Bandwidth: DC~5MHz |
VERTICAL SYSTEM
|
| Sensitivity |
2mV~5V/DIV, 11 steps in 1-2-5 sequence |
| Sensitivity accuracy |
≤3% (5 div at the center of display) |
| Vernier vertical sensitivity |
Countinuously variabble to 1/2.5 or less of panel-indicate value |
| Width of band (-3dB) |
DC ~100MHz(2mV/div: DC~20MHz) |
| Rise time |
3.5ns (2mV/div:17.5ns) |
| Singal delay |
Leading edge can be monitored |
| Input Coupling |
AC, DC, GND |
| Input Impedance |
1MΩ±2% / Approx 25pF |
| Vertical mode |
CH1, CH2, DUAL(CHOP/ALT), ADD, CH2 INV |
| Bandwidth limited |
20MHz |
| Common-mode rejection ratio |
50:1 or better at 50kHz |
| Dynamic range |
8 div at 100MHz |
HORIZONTAL SYSTEM |
| Horizontal modes |
MAIN(A), ALT, DELAY(B) |
A(main) sweep time
|
50nS~0.2S/div, continuously variable(UNCAL) |
| B(delay) sweep time |
50ns~50ms/div |
| Sweep accuracy |
±3%, ±5% at x10MAG |
| Sweep magnificaton |
x10MAG (maximum sweep time 5ns/div) |
| Delay time |
1us~5s |
| Delay jitter |
Better than 1:20000 |
| Alternate separation |
Variable |
TRIGGER SYSTEM |
| Mode |
AUTO, NORM, TV |
| Source |
CH1, CH2, EXT, LINE |
| Coupling |
AC, DC, HFR, LFR |
| Slope |
"+" or "-" polarity or TV sync polarity |
| Trigger sensitivity |
Mode |
Frequency |
INT |
EXT |
| Auto |
10Hz~20Mhz
20MHz~100MHz |
0.35div
1.5div |
50mV
150mV |
| Norm |
DC~20MHz
20MHz~100MHz |
0.35div
1.5div |
50mV
150mV |
| TV
|
sync signal |
1div |
200mVpp |
| TV sync |
TV-V, TV-H |
| Max external input voltage |
400V(DC+AC peak) at 1kHz |
| External input impedance |
1MΩ±5% / approx. 25pF |
X-Y OPERATION
|
| Mode |
X-axis: selectable CH1, CH2, EXT
Y-axis: selectable CH1, CH2, CH1 and CH2 |
| Sensitivity and Accuracy |
2mV~5V/DIV, ±3%; EXT:0.1V/div±5% |
| X-axis bandwidth |
DC~500kHz(-3dB) |
| Phase Error |
3° or less from DC~50kHz |
| OUTPUT SIGNAL |
| Trigger signal output |
Voltage: approx.25mV/div into 50Ω |
| Frequency response: DC~10MHz |
| Calibrator output |
1kHz square wave, 2Vpp±2% |
| CURSOR READOUT FUNCTION |
| Cursor measurement function |
ΔV, ΔV%, ΔVdB, ΔT, 1/ΔT, ΔT%, Δθ |
| Cursor resolution |
1/100 DIV |
| Effective cursor range |
Vertical:±3 div; Horizontal: ±4 div |
| Panel setting display |
Vertical: V/div(CH1, CH2), UNCAL, ALT/CHOP/ADD, INV, probe
factor, AC/DC/GND
Horizontal: s/div(MTB,DTB), UNCAL, x10MAG, delay time, HO
Trigger: source, coupling, slope, level, TV-V, TV-H
Others: X-Y, lock, save/recall MEM 0-9 |
| Special function |
| TIME/DIV Auto range |
Provided |
| Panel setting save & recall |
10 sets |
| Panel setups lock |
Provided |
| Power source |
110~127 VAC±10%, 220~240VAC±10%, 50Hz±2Hz / 60Hz±2Hz |
| ACCESSORIES |
Instruction manual x 1,
Power cable x 1,
Probe x 2 ,Fuse x1 |
| DIMENSIONS & WEIGHT |
10(W) x 140(H) x 400(D)mm,
Approx. 8kg
|
|
|
|
|
|
Copyright © Shanghai MCP Corp, 2009. All Rights Reserved |
|
Add: Fl.3(East),Blk.4, Bai Da Industrial Park,No.1030 Tong Pu Rd., Shanghai, China
Tel: 86-21-52695961/52695965
Fax:86-21-52699261|Zip: 200333|E-mail: sales@mcpsh.com
|
| |
| |
|
|
